mundoclima H11 Series, Руководство по обслуживанию

Страница: 60 / 73

10.3.3.10 Temperature protection of compressor discharge (ODU P4/ PC 06)
Temperature protection of
compressor discharge
Temperature protection of
compressor discharge
Check whether the
compressor discharge temp. is
more than 115°C ?
Check whether the
compressor discharge temp. is
more than 115°C ?
Check whether the
connection is right between
compressor discharge temp.
sensor and PCB according
to wiring diagrams?
Check whether the
connection is right between
compressor discharge temp.
sensor and PCB according
to wiring diagrams?
easure the resistance value
of
compressor discharge
temp. sensor.
If the va lue is
not normal
is normal refer to
the
Appendix i i
2?
Measure the resistance value
of
compressor discharge
temp. sensor.
If the value is
not normal
is normal refer to
the
Appendix
2?
No
Yes
Yes
No
Correct the wiring connection
Correct the wiring connection
Stop leaking and add refrigerant
Stop leaking and add refrigerant
Replace the compressor discharge temp. sensor
Replace the compressor discharge temp. sensor
No
Yes
Replace h igh pressure valve assy
Replace high pressure valve assy
Yes
No
eplace outdoor main PCB
Replace outdoor main PCB
No
Check whether the
refrigerant is leak
C
Check whether the
refrigerant is leak
Service manual
MUEX-
H11 series
59