7
Operator Safety
Training
Operators must be properly trained in the correct use of these conveyors before taking part in any
operation. It is up to the facility to determine guidelines based on these instructions for use. It is
up to the organizations management structure to implement training programs, written
procedures, and supervision that are compliant to local regulations.
Operation
▪
WARNING
–
This product is a piece of power equipment that if used in ways other
than described by this instruction manual can result in operator injury or even
death.
▪
WARNING
–
Keep all shields, guards and safety devices installed and in proper
working order at all times
.
▪
WARNING
–
Keep all hands, feet and clothing away from power driven parts
.
▪
WARNING
–
These Conveyors are capable of pulling body parts, hair, clothing,
gloves, etc. into power driven parts. Use extreme caution to prevent unintended
items from entering any part of the conveyor.
All persons operating Conveyors need to fully read this instruction manual and familiarize
themselves with the machine before operation. The Conveyor is designed to have 1-4 operators
standing at the front allowing material to be transported directionally left or right away from the
faceplate of the machine.
Installation
There is no need to fully unpack the crate prior to assembly, parts will be accessible from the crate
as needed in assembly.
Installing Mounting Brackets:
Parts Needed:
Mount Bracket Assemblies (2)
Machine Mounting Fasteners:
3/8” Flat Head (4)
3/8” Split Washer (4)
3/8” Hex Nut (4
)
1.
Identify left and right orientation of the Mounting Bracket Assemblies. These assemblies are prebuilt
with two main parts making up the assembly: The Mounting Bracket, and Pivot Bracket. The Mounting
