MUNBYN IMC02, Руководство пользователя

Страница: 6 / 8

Version 1.02 IMC02 Counterfeit Detector User Manual Page 9 of 13
Please check whether the banknote is in good
condition and place the banknote to the left again.
If the alarm continues , length calibration is required.
E01 Length exceeds
E02 Length alarm
E03 Half a banknote Please check if the banknote is complete.
E06 Double banknote Please put in only one banknote.
E07 Tilted banknote Please put the banknotes to the left.
E 10 Failed to refund Please check if your banknotes are too old or too soft.
E11 Basic image error This may be a counterfeit currency.
Please check whether the banknotes are damaged,
severely wrinkled, or dirty.
E40 U V Please turn on the machine and clean the inside of the
machine before checking banknotes.
If the error continues, it means that the UV module has
been damaged.
Error Message Code Handing Method (recommendation)
4.1. Error Code
4.0. Maintenance
Table 4 - 1 Error Code
4.2. Inaccurate Detection of Currency Detector
There are several conditions to affect the accuracy of the currency detector.
1) The bill size is out of the range according to IMC02 specification.
2) The banknote is damaged with different ways such as lack of corner, tape, hole, tear
and folded. As shown in Figure 4-1, it is not recommended to count this kind of bills.
E4 1 U V image error This may be a counterfeit currency. Please check
whether the banknotes are damaged, severely wrinkled,
or dirty.
Please clean the inside of the machine.
Please check whether there is magnetic interference
around the machine.
If the error continues, it means that the magnetic
module is damaged.
E60 Non-magnetic
E61 Magnetic pulse 1 alarm
E62 Magnetic pulse 2 alarm
E63 Magnetic pulse 3 alarm
E64 Too much magnetism
E65 Magnetic prefix
Please check if your banknotes are counterfeit . E66 Image magnetism error
Version 1.02 IMC02 Counterfeit Detector User Manual Page 10 of 13