MUNBYN IMC02, Руководство пользователя

Страница: 7 / 8

4.3. ‘ADD’ function settings
Use the following steps to turn on/off the Add function.
1) Press ‘CUR/DIP’ and ‘REP/CLR’ at the same time for 5 seconds to enter the selection
interface.
2) Press and hold the ‘CUR/DIP’ and ‘REP/CLR’ buttons simultaneously on the d_1 interface
for 2 seconds to enter the function selection interface.
3) Press the ‘CUR/DIP’ button 3 times to switch the mode to P22, and finally press and
hold the ‘REP/CLR’ to switch the value of P22 to 0 to turn on the Add function, and switch
the value of P22 to 1 to turn off the Add function.
Demo video: https://munbyn.biz/IMC02ADD
Version 1.02 IMC02 Counterfeit Detector User Manual Page 11 of 13
3) Other abnormal operation or there is unknown thing inside the IMC02.If something
inside the IMC02, you need to open the front cover to check, and clean the internal
sensors.
Figure 4 - 1 Bill Damaged Ways
Table 5-1 Technical Parameters
Error Detection Image, paper quality, size, thickness detection
Available currencies USD, EUR, GBP, LBP, AED, MXN
Display LED display
Button CUR / DIR, REP / CLR
Interface USB, software upgrade interface
Detecting Speed <0.5 seconds/piece
Power Consumption <10W
Power Supply Battery
AC 100V-240V 50-60Hz or DC 12V/1.0A
Rechargeable lithium battery 11.1V / 500 mAh
Operating Temperature CE, FCC, ROHS
Operating Temperature 0°C - 40°C
Storage Temperature -20°C - 65°C
Counterfeit Detection MG (Magnetic), IR (Infrared), UV (Ultraviolet)
Error Detection Image, paper quality, size, thickness detection
Available currencies USD, EUR, GBP, LBP, AED, MXN
Counterfeit Detection MG (Magnetic), IR (Infrared), UV (Ultraviolet)
Version 1.02 IMC02 Counterfeit Detector User Manual Page 12 of 13
5.0. Technical Parameters