MTIC Installation & Operation Manual
MTIC Manual R6
Page 3 of 18
MTIC
– Indicator Controller
Four Actuation Delays:
Used to average out wave action and for other control functions.
Method of Operation:
The MultiTrode MTIC liquid level monitoring and control system was
developed to provide a solution for interfacing to building
management systems and town water/sewerage systems.
The system can directly control operation of pumps and provide level indication at the site, as well as at
up to four remote locations, using 0-10V DC or 4-20mA current loop.
Until the advent of this MultiTrode system, these facilities had not been economically practical for
hydraulic services in high-rise buildings.
MTIC Installation & Operation Manual
Revision 6.0
7 August 2013
MULTITRODE® and MULTISMART® are registered trademarks of MultiTrode Pty Ltd in Australia, USA, and Europe. PUMPVIEW® is a
registered trademark of MultiTrode Pty Ltd in the USA and Australia. Designs registered for the MultiSmart Pump Controller Remote and
Base Modules in Australia, USA, Europe and China. Patents pending in Australia, USA, and Europe.
©2013
M
ULTI
T
RODE
P
TY
L
TD
.
T
HIS PUBLICATION IS PROTECTED BY COPYRIGHT
.
N
O PART OF THIS PUBLICATION MAY BE REPRODUCED BY ANY
PROCESS
,
ELECTRONIC OR OTHERWISE
,
WITHOUT THE EXPRESS WRITTEN PERMISSION OF
M
ULTI
T
RODE
P
TY
L
TD
.
