Multitone RPR 563GS, Техническое руководство

Страница: 47 / 87

RPR 563GS/KGS
TM1187A Issue C Page 5 - 3
ROUTINE MAINTENANCE
1. This is limited to battery replacement and surface cleaning of the outer case using a lint
free cloth moistened with soapy water. Spirit or other solvents should not be used as
this may damage the case.
SERVICE POLICY
2. Repairs are only to be performed by qualified personnel in authorised workshops.
3. The transceiver is repairable to component level. The Display Module is a disposable
item. If any screening cans are removed for access to components, they must be
refitted flush to the printed circuit board.
WORKSHOP PROVISIONS
4. Repair workshops must be free from hostile radio interference or otherwise equipped
with Faraday cages. Suitable equipment must be available to remove and replace the
surface mount components which are used extensively within the transceiver.
TEST EQUIPMENT, TOOLS AND ANCILLARIES
Test Equipment
5. The following test equipment is required:
IBM PC or compatible personal computer.
P648 Programming Unit.
P648T Programming Software, RPR 560 Series.
P910/P911 Cable Assembly (PC to P645).
P645 Test Encoder (including Power Supply).
P645A Test Encoder Software (V04.00 or later).
RF Signal Generator.
Oscilloscope.
RF Power Meter. *
Millivoltmeter supplied with high impedance, low capacitance probe
P654 Alignment Jig.
UHF Frequency Counter.