57
Owner's Manual
Register Unit
Range
Default
Description
S38
decimal
0–255
20
This register specifies the delay be-
tween the modem’s receipt of the H
command to disconnect (or ON-to-
OFF transition of DTR if the modem
is programmed to follow the sig-
nal), and the disconnect operation.
Applicable to error-correction con-
nection only. If S38 is set to a value
between 0 and 254, the waits for
the remote modem to acknowledge
all data in the modem buffer before
disconnecting. If S38 is set to 255,
the modem does not time-out and
continues to attempt to deliver data
in the buffer until the connection is
lost or the data is delivered.
S 3 9
Flow Control Bit-Mapped Options Status (Indicates the status
of command Options.) Default: 3
Bit 0-2
Status of Command Options
0 = No Flow Control
3 = RTS/CTS (&K3)--Default
4 = XON/OFF (&K4)
5 = Transparent XON (&K5)
6 = Both Methods (&K6)
Bit 3-7
Reserved
Register
Unit
Range Default Description
S 4 0
Bit-Mapped Options Status (Indicates the status of command
Options.) Default: 104
Bit 0-1
MNP Extended Services (-Kn)
0 = Disable Extended Services (-K0) --
Default
1 = Enable Extended Services
2 = Enable Extended Services
Bit 2
Reserved
Bit 3-5
Break Handling (\Kn)
0 = \K0
1 = \K1
2 = \K2
3 = \K3
4 = \K4
Содержание MultiModem MT5600ZDXV
Страница 1: ...Model MT5600ZDXV K56flex Data Fax Modem with AT V Voice Command Set Support Owner s Manual...
Страница 64: ......
Страница 65: ...82069501...