manualshive.com logo in svg

Multitech MultiModem MT5600ZDXV, Руководство пользователя

Поделиться
Скачать
Multitech MultiModem MT5600ZDXV Скачать руководство пользователя страница 3

3

Owner's Manual

Owner’s Manual

           

 82069501 Revision B

Model 

# MT5600ZDXV

This publication may not be reproduced, in whole or in part, without
prior expressed written permission from Multi-Tech Systems, Inc.  All
rights reserved.

Copyright © 1998, by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with
respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of Multi-Tech Systems, Inc. to notify any
person or organization of such revisions or changes

.

Revision

Description

  

  B

Revised AT commands and S-Registers; added information

8/25/98

on V.90 and the SPKR and LINE IN jacks.

MultiModemZDXV, Multi-Tech, and the Multi-Tech logo are trademarks
of Multi-Tech Systems, Inc.
K56flex is a registered trademark of Rockwell and Lucent Technologies
Corp. ©Rockwell Semiconductor Systems, Inc. 1997
All Rights Reserved.  Reproduced by Permission.
All brand and product names mentioned in this publication are trade-
marks or registered trademarks of their respective companies.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(612) 785-3500 or (800) 328-9717

U. S. FAX 612-785-9874

Fax-Back Service 612-717-5888

 Technical Support (800) 972-2439

BBS (612) 785-3702 or (800) 392-2432

                    Internet Address: http://www.multitech.com

   Technical Writer: [email protected]

Содержание MultiModem MT5600ZDXV


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды