Multitech MultiModem MT5600ZDXV, Руководство пользователя

Страница: 40 / 65

40
Model MT5600ZDXV
Command: &V1 Display Last Connection Statistics
Values: n/a
Description: Displays the last connection statistics in the following
format (shown with typical results):
TERMINATION REASON...... LINK DISCONNECT or
LOCAL REQUEST
Last TX Data Rate ...... 33600 BPS
Highest TX Data Rate ...... 33600 BPS
Last RX Data Rate ...... 28800 BPS
Highest RX Data Rate ...... 28800 BPS
Error Correction Protocol ... LAPM
Data Compression ..... V42Bis
Line Quality ...... 030
Highest SPX RX state ...... 068
Highest SPX TX state ...... 067
Command: &W
n Store Current Configuration
Values: n = 0 or 1
Default: None
Description: &W0 Store active modem settings in NVRAM as profile 0.
&W1 Store active modem settings in NVRAM as profile 1.
Command: &Y n Select Stored Configuration for Hard Reset
Values: n = 0 or 1
Default: none
Description: &Y0 Select stored configuration 0 on power-up.
&Y1 Select stored configuration 1 on power-up.
Command: &Z n=x Store Telephone Number
Values:
n = 0, 1, 2, or 3 memory locations
x = Dialing string
Default: None
Description: Stores telephone dial string x in memory location n. Dial
the stored number using the command
ATDSn.
Command: % E n Monitor Line Quality and Auto-Retrain or Fall-
back/Fallforward
Values: n = 0, 1 or 2
Default: 2
Description: %E0 Disable line quality monitor and auto-retrain.
%E1 Enable line quality monitor and auto-retrain.