Multitech MultiModem MT5600ZDXV, Руководство пользователя

Страница: 43 / 65

43
Owner's Manual
*
The first state is where the modem receives a break from the DTE when the
modem is operating in data transfer mode:
\K0 Enter on-line command mode, no break sent to the
remote modem.
\K1 Clear data buffers and send break to remote modem.
\K2 Same as \K0.
\K3 Send break to remote modem immediately.
\K4 Same as \K0.
\K5 Send break to remote modem in sequence with trans-
mitted data.
*
The second case is where the modem is in the on-line command state
(waiting for AT commands) during data connection and the \B command is
received in order to send a break to the remote modem:
\K0 Clear data buffers and send break to the remote modem.
\K1 Same as \K0.
\K2 Send break to remote modem immediately.
\K3 Same as \K2.
\K4 Send break to remote modem in sequence with trans-
mitted data.
\K5 Same as \K4.
*
The third case is where a break is received from a remote modem during
a non-error corrected connection:
\K0 Clear data buffers and send break to the DTE.
\K1 Same as \K0.
\K2 Send break to DTE immediately.
\K3 Same as \K2.
\K4 Send break to DTE in sequence with transmitted data.
\K5 Same as \K4.
Command: \ N n Error Correction Mode Selection
Values: n = 0–5
Default: 3
Description: \N0 Non-error correction mode with data buffering (same
as &Q6).
\N1 Direct mode.
\N2 V.42/MNP reliable mode.
\N3 Same as \N2
\N4 V.42 reliable mode.
\N5 MNP reliable mode.