Multitech MMCModem GPRS Скачать руководство пользователя страница 18

Страница: 18 / 203

Chapter 4 – General AT Commands

Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)

Clock Management +CCLK

Description:

Sets or gets the current date and time of the ME real-time clock.

Values:

<date and time string>

String format for date/time is “yy/MM/dd,hh:mm:ss”

Note: Valid years are 98 (for 1998) to 97 (for 2097). The second field is not mandatory. Default
date/time is “98/01/01,00:00:00” (January 1

, 1998 / midnight).

Syntax:

AT+CCLK=<date and time string>

Command

Possible responses

AT+CCLK=”00/06/09,17:33:00”
Note: set date to June 9th, 2000, and
time to 5:33pm

OK
Note: Date/Time stored

AT+CCLK=”00/13/13,12:00:00”
Note: Incorrect month entered

+CME ERROR 3

AT+CCLK?
Note: Get current date and time

+CCLK: “00/06/09,17:34:23”
OK
Note: current date is June 9th, 2000
current time is 5:34:23 pm

Alarm Management +CALA

Description:

Sets the alarm date/time in the modem. The maximum number of alarms is 16.

Note:

The date/time should be set with the AT+CCLK command prior to using AT+CALA.

Values:

<date and time string>

String format for alarms: “yy/MM/dd,hh:mm:ss” (see +CCLK)

Note:

Seconds are taken into account.

<index>

Offset in the alarm list, range 1 to 16

Syntax:

AT+CALA=<date and time string> (set alarm)

AT+CALA=””,<index>

(delete

alarm)

Command

Possible responses

AT+CALA=”00/06/09,07:30”
Note: set an alarm for June 9

, 2000 at 7:30 am

OK
Note: Alarm stored

AT+CALA=”99/03/05,13:00:00”
Note: set an alarm for March 5

, 1999 at 1:00 pm

+CME ERROR 3
Note: Invalid alarm (date/time expired)

AT+CALA?

Note: list all alarms

+CALA: “00/06/08,15:25:00”,1
+CALA: “00/06/09,07:30:00”,2
+CALA: “00/06/10,23:59:00”,3
Note: three alarms are set (index 1, 2, 3)

+CALA: “00/06/08,15:25:00”,1
Note: an alarm occurs (index 1)

AT+CALA=””,3
Note: delete alarm index 3

OK
Note: Alarm index 3 deleted

AT+CALA?
Note: list all alarms

+CALA: “00/06/09,07:30:00”,2
Note: Only one alarm (index 2)

Содержание MMCModem GPRS












































































































































































































Результаты поиска

Содержание MMCModem GPRS

Отзывы:

Похожие инструкции для MMCModem GPRS

Бренды по названию

Популярные бренды

Multitech MMCModem GPRS, Справочное руководство

Результаты поиска

Содержание MMCModem GPRS

Отзывы:

Похожие инструкции для MMCModem GPRS

Бренды по названию

Популярные бренды