Multi-Tech CallFinder Quick Start Getting Started
5
Getting Started
This guide shows you how to set up your Multi-Tech Model CF220
CallFinder.
The CallFinder is a DID-to-analog telephony adapter. It brings
analog DID services to a key telephone system or PBX that is not
DID-enabled. When equipped with the CallFinder, the phone
system can route incoming DID calls directly to end-user extensions.
The CallFinder has two DID channels. Each channel is connected
to the telco DID line on one side and to the PBX/key system on the
other side. A CallFinder extension port can be connected either to a
trunk port or to a station port on a PBX. The choice between trunk
port or station port connections depends on port availability, logging
requirements, and/or on whether it is necessary for incoming DID
calls to be treated like outside calls instead of intra-PBX calls.
Front Panel LEDs
We Supply
•
A CF220 CallFinder with factory-installed software
•
Two power supplies – one 5Vdc and one 48Vdc
•
Two common telephone cables (RJ11 at both ends)
•
Two DID telephone cables (RJ11 at one end; RJ12 at other end)
•
A utility software program for updating CallFinder firmware
•
This printed Quick Start Guide
