Multiplex RR EasyGlider, Инструкция по эксплуатации, Страница: 11 / 48

11
RR EasyGlider # 26 4205
RR EasyGlider Electric # 26 4207
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts (using the Parts List)
before
you start construction, as we cannot exchange components which you have already worked on . If you find any part is not
acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model Department bearing
adequate postage. Please be
sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the
flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we
are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Additional items required for the RR EasyGlider / EasyGlider Electric:
Adhesive: cyano-acrylate (“cyano”) and activator
Use medium-viscosity cyano glue (not styrofoam cyano) in conjunction with activator (“cyano kicker”). Epoxy adhesives produce
what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away from the parts under
load. Hot-melt glue (from a glue gun) can be used as an alternative.
MULTIPLEX radio control system components for the RR EasyGlider and EasyGlider Electric:
PiCO 5/6 UNI receiver 35 MHz, e.g. A-band Order No. 5 5920
alternatively 40 MHz Order No. 5 5921
or
Micro IPD UNI receiver 35 MHz, e.g. A-band Order No. 5 5971
alternatively 40 MHz Order No. 5 5972
MagicMixer #1 For two-channel radio control transmitter without mixer (Glider)
For three-channel radio control transmitter without mixer (Electric)
Order No. 7 3000
Y-lead (UNI) For four-channel radio control transmitter with separate rudder control Order No. 8 5030
Battery charger:
MULTIcharger 5008 DC (charge current 100 mA … 5 A) 1 - 8 NiCd / NiMH cells Order No. 9 2525
or
MULTIcharger LN-2010 (charge current 200 mA … 2 A) 1 - 10 NiCd / NiMH cells Order No. 9 2523
for use with 12 V power supply, e.g. car battery and 1 - 4 Lithium-Polymer cells
Additional items for RR EasyGlider Electric only
We recommend the 8 / 1500 mAh battery, # 15 6037
MULTIPLEX Permabatt NiMH flight battery (AA cells) 7 / 1500 mAh Order No. 15 6030
or MULTIPLEX Permabatt NiMH flight battery (AA cells) 8 / 1500 mAh Order No. 15 6037
MULTIPLEX Li-Batt (Li-Po) flight battery 2 / 1-1500 mAh Order No. 15 7011
MULTIPLEX Li-Batt (Li-Po) flight battery 2 / 1-2000 mAh Order No. 15 7016
If required: connector, speed controller / flight battery 6-pin green Order No. 8 5213
Additional items for RR EasyGlider only
NiMH receiver battery, UNI 4 / 1500 mAh Order No. 15 6029
Mini switch harness with UNI charge socket Order No. 8 5037
Tools:
Scissors, balsa knife, small cross-point screwdriver, side-cutters, soldering iron, 1.5 mm A / F allen key (supplied).
Note: please remove the picture pages from the centre of the building instructions.
Specification RR EasyGlider RR EasyGlider Electric
Wingspan 1800 mm 1800 mm
Overall length 1130 mm 1115 mm
Fuselage length 1060 mm 1020 mm
All-up weight approx. 710 g with standard power system approx. 880 g
Wing area FAI approx. 41.6 dm² FAI approx. 41.6 dm²
Wing loading approx. 17 g / dm² approx. 21 g / dm²
RC functions Elevator, rudder, ailerons Plus throttle
GB