Multilink EB1s, Инструкция по установке и эксплуатации

Страница: 24 / 41

22
Issue 13 (11/14/2017)
Battery Status indicators: Displays battery voltage and discharge current.
Charger Status indicators: = Charger Off =Trickle Mode = Bulk mode
= Equalize mode = Float mode.
The Current display shows whole amperes or a single decimal place if the
value is less than 1. For detailed readings use the Charger Status page
in the Battery Status menu.
5.3.3 History Menu
The History Menu displays the Life Timer, the Inverter Timer, and the Event Counter. There is also a screen to
Clear the Event counter and the Inverter Timer.

Displays the total ‘ON’ time of the power supply
as measured in xxx days and nn hours
.
  
Cannot be reset.
Displays the total inverter operating time
as measured in xxxx hours, yy minutes, and nn seconds.
  
Reset by the Clear Events function.
Displays the total number of transfers and battery tests.
This value can be cleared in the Clear Events screen.
  
Clear Events
Resets the Event Counter and Inverter Timer.
Yes resets and exits.
No exits without resetting.
If Yes:

5.3.4 Battery Status Menu
The Battery Status Menu displays the Battery String Voltage, the Individual Battery Voltages in each string, and
the Charger status. There is also a screen to Start and Stop the Battery Test.

Displays the total Battery Voltage and the Battery Discharge current.
  
Displays the individual Battery Voltages in each string when the optional
Battery Balancer Module is installed Each configured battery string will
  
have a screen like this.