Multilink EB1s, Инструкция по установке и эксплуатации

Страница: 23 / 41

21
Issue 13 (11/14/2017)
Displays the measured value of the Battery String
voltage and the Battery Discharge current.
 
Displays the Battery Temperature measured by the
Battery Temperature Probe. Temperatures below
   
0°C will display a minus(-) before the leading digit
.
Displays the Inverter Temperature measured by the
circuit board temperature sensor. Temperatures below
   
0°C will display a minus(-) before the leading digit.
Displays the measured AC line Input Power
and total measured Output Power in Watts.
 
Major Alarm display: x is the current displayed alarm and
n is the total number of alarms. The text description of the
   
current displayed alarm is on line 3. Multiple descriptions are
shown at a 2 second display rate.
Minor Alarm display: x is the current displayed alarm and
n is the total number of alarms. The text description of the
   
current displayed alarm is on line 3. Multiple descriptions are
shown at a 2 second display rate.
System Status display
The System Status display shows all the major system parameters at once on the same screen.
LINE INPUT OUTPUTS BATTERY SYSTEM
VOLTAGE

INVERTER STATUS
CURRENT ALARM STATUS
POWER BATTERY TEMP
TAMPER

KEY FUNCTIONS
CHARGER
STATUS/
CURRENT
Inverter Status indicators:

= Inverter Off

= Inverter On = Line Qualifying
= Local Test Running = Remote Test Running
Alarm Status indicators: = Major Alarm = Minor Alarm
Numbers indicate the total count of alarms in each category.
Tamper Switch indicators: = Disabled
= Switch Open if Active High, Closed if Active Low.
= Switch Closed if Active High, Open if Active Low.
Battery Temp indicators: Will display
“ ” if temperature probe is disconnected.
Temperature is displayed in degrees Celsius.