MULTILIFT Hooklift XR S Series, Руководство по установке

Страница: 5 / 33

1. PREPARING FOR INSTALLATION
1.1 Before starting installation
Make sure that the XR-unit to be installed has been checked upon arrival for both transport dam-
age and contents of the delivery.
Check that all the parts are available to complete the installation as planned.
Check the availability of the correct tools and lifting gear during the installation.
1.2 General safety precautions during installation
Multilift XR demountable body lifting equipment may only be installed by qualified personnel.
XR-unit can only be installed on suitable truck chassis. Normally chassis have to be meant for tip-
ping use.
Before installation and preferably before sale of the equipment, calculations should be made in-
cluding gross vehicle weight, axle weight and any other weights and dimensions needed to en-
sure the overall economy of the combination.
Maximum permitted GVW and capacity of the unit must be in proportion to each other, and neither
should be exceeded. Exceeding either maximum GVW or capacity may result in physical injury or
material damage.
When installing the unit it must be ensured that the keys of the vehicle are in the possession of
the person carrying out the installation.
During installation, a fixed working light is to be installed for operating with demountable body in
dark or poorly lighted conditions.
In all installation work general safety rules must be followed. Further information on these can be
obtained from occupational safety personnel and the employer.