MULTILIFT Hooklift XR S Series, Руководство по установке

Страница: 27 / 33

5 CONTROL SYSTEM
5.1 Installation of control unit
Choose a suitable location for the control
unit in the vehicle’s cabin. A suitable place is
one where the operator can reach the con-
trols and see the signal lights easily from
driver’s seat without straining and at the
same time check the unit’s movements
through rear windows or mirrors.
A location that meets these requirements
would be between driver’s seat and the door,
on the cab floor or attached to the seat
frame. Or in the middle of cabin between the
seats.
Position the control unit in such a way that it
is impossible to touch them unintentionally or
to have clothes caught by them.
It is essential for the control system to func-
tion with door shut.
5.2 Installation of wiring loom
Before power connection check the
amperage and voltage of the truck’s
alternator.
The hooklift is suitable for 12V or 24 V (max
26 V +10%) and excess of this voltage may
cause failure. In the circuit card of control
unit is voltage selecting switch. Check its
settings before any installations. (Drawing)