MULTILIFT Hooklift XR S Series, Руководство по установке

Страница: 21 / 33

3.9 Mounting instructions when using
other plates
Fix XR-unit to the vehicle chassis using
clamps. Locate the upper edge of brackets
horizontal above the holes of the subframe
that drilling of holes is possible. Use the ex-
isting holes in the chassis frame wherever
possible. The holes of subframe are
1.38 in
(
35mm
)
above the lower edge of subframe.
Only the large rear retainer plate is mounted
flush with the chassis member top. (Drawing)
Choose the dimensions of the large rear re-
tainer plate and shape the plate so that the
plate can hold the minimum number of
screws with required distances despite the
bracket of rear spring or other such parts.
(Drawing)
Drill holes of fitting bolts to fitting plates and
to the chassis frame if necessary.
About drilling of holes
•
Before drilling holes trough the chassis
frame, ensure that no damage will result
to any tubes or wiring etc.
•
Drill holes as necessary in the chassis
members. It’s recommended to use an
undersized drill,
0.55 in (
13,9 mm
)
drill for
M14 bolts, so that a play free joint is
ensured.
•
Never drill holes in the flanges of the side
members.
•
Never weld filler pieces in the holes of the
chassis frame.
•
Drilled holes must always be de-burred
and treated with primer / paint.
Mount and tighten the bolts and nuts of re-
tainer plates.
The torque of M12 bolts is 85 Nm