34
www.
multilaser
.com.br
Q&A
Fail of startup after battery
installed
Low battery. Replace battery is needed.
Fail to remove packing material of the battery
Improperly installing the battery. Make sure that the batteries are correctly installed.
Fail of startup after installing dry battery. Please make sure is battery loop is not held in polarity of
the battery?
Fail to take photo and video after
pressing shutter key
No EMS memory available, Card is required for shot.
SD card in the video camera is with write-protection. Please take out the SD cared to push the
write-protection switch for remove write-protection.
Blurred photo taken
Hand trembling when shot. Please hold the video camera stable with two hands, or to stabilize
the main unit of the video camera with other objects like a tripod, and keep the video camera
stable while shot.
Dim photo or video taken
Insufficient light for the environment where photo or video taken. Please take photo or video in
the environment with sufficient light, or use lamp to supplement light.
Automatic power-off of the video
camera
Low battery. Please replace the battery.
To save power, the video camera will automatically power off according to setting if there is no
operation within 1 minute (3 minutes or 5 minutes according to setting).
Fail to delete documents in the
video camera
There is write-protection with SD card in the video camera. Please take the SD card out to re
-
move the write-protection. Document protection function is enabled in the camera menu. Please
close this function in the menu.
dc115_manual_rv0.indb 34
1/2/2012 11:19:37
