MULTICOM 4 PLUS Скачать руководство пользователя страница 25

49

Limited Warranty Statement

48

Limited Warranty Statement

product label and shall not cover transformers, metal boxes, 
access cards & tags, batteries, tamper kits, spare parts, 
cables & connectors, temperature sensors, promotional 
items & displays or any freight, and labour. 

This warranty does not cover damage incurred in shipping 
or handling, problems that result from external causes such 
as accident, abuse, and misuse, or problems with electrical 
power failures, or other damage caused by:

• 

peripherals or unauthorised alterations or 

PRGLÀFDWLRQV

• 

VHUYLFLQJQRWDXWKRULVHGE\D0XOWLFRP&HUWLÀHG

Professional;

• 

usage that is not in accordance with product 
instructions;

• 

using accessories, parts or components not supplied 
or recommended by Multicom;

• 

failure to provide a suitable installation environment 
for the products;

• 

failure to change passwords, settings and/or pin 
codes from factory default and;

• 

improper maintenance or failure to perform regular 
preventative maintenance

Multicom’s responsibility for defects in material is limited to 
repair and replacement of the product.  Multicom does not 
accept liability beyond the remedies provided for in this 

Limited Warranty Statement

Multicom Systems (henceforth known as Multicom) warrants 
its products to be free from defects in material and 
workmanship, under normal use, for a period of twelve (12) 
months, or twenty four (24) months if the Multicom product 

LVLQVWDOOHGE\D¶&HUWLÀHG0XOWLFRP,QVWDOOHU·IURPWKH

date of purchase.  If the warranted products are returned 
to Multicom during this period of coverage, Multicom 
will repair or replace (at its discretion) without charge, 
those items found to be defective.  Any replacement or 
repaired parts are warranted for the remainder of the 
original warranty or ninety (90) days, whichever is longer. 
The original purchaser must promptly notify their Multicom 
distributor, in writing during the warranty period, that 
there is a defect in material or workmanship.  All Multicom 
distributors and dealers have a warranty program and you 
are expected to return your product with proof of purchase 
in accordance with such a program.  Prior authorisation is 
required before returning the product, as Multicom will not 
accept any shipment for which prior authorisation was not 

ÀUVWREWDLQHG0XOWLFRPZLOODWLWVRSWLRQUHSDLURUUHSODFH
ZLWKRXWFKDUJHWKRVHDXWKRULVHGUHWXUQHGLWHPVLWÀQGV

defective.

Please note that this warranty does not cover any software 
products, which are licensed under terms of a separate 
software license agreement included with the product 
purchased. This warranty only applies to defects in parts 

UHODWLQJWR0XOWLFRPSURGXFWVLGHQWLÀHGZLWKD0XOWLFRP

Содержание 4 PLUS






























Отзывы: