MULTICOM 4 PLUS, Руководство по установке, Страница: 22 / 29

43 Multicom Format Template 42 Multicom Format Template
Multicom Format Template
The Multicom range will send ‘pending
alarms’ (Event type 6) with test reports,
you may need to include pending alarm
QRWLÀFDWLRQVWRFRPHWRWKHRSHUDWRU
* 7KLVÀHOGLV not used by the Multicom 4 Plus but may
be used by other products in the Multicom range.
Event CID Offset (Zone) Description
Tamper 18 X 950999 00 External Tamper Triggered
Zone 1 18 X 950999 01 Zone 1 Triggered
Zone 2 18 X 950999 02 Zone 2 Triggered
Zone 3 18 X 950999 03 Zone 3 Triggered
Zone 4 18 X 950999 04 Zone 4 Triggered
PSTN Fault Alarm * 18 X 950999 05 PSTN voltage has been lower than the
programmed voltage for the programmed time
Battery Fault Alarm * 18 X 950999 06 The battery voltage has been outside 'normal
operating limits' for the programmed period of
time
GSM Fault Alarm 18 X 950999 07 GSM has not been connected to the network for
the programmed period of time
You will need to have your monitoring station map
the following events for the account (Fax this list) if
Multicom is not already in their Contact ID list.
X = Event, Restore or Previous Alarm (E,R or P)�