MULTICOM 4 PLUS, Руководство по установке, Страница: 21 / 29

41 Event Descriptions 40 Event Descriptions
Event Descriptions
Event Default Table
3� External Zone / Tamper - The output will
trigger while the Tamper is open, or, any of
the on board zones are not sealed with the
appropriate EOLR.
4� Power Fault - The output will trigger after the
programmed power fault time.
Note: See Option 38 for Relay Mapping.
Event Fault LED
Fault Relay
Default Contact ID
Reporting Fault relay &
Contact ID delay
Power Fault Instant Relay 1 Enabled 15 minutes
Tamper Instant Relay 1 Enabled Instant
Zone 1 Instant Relay 1 Enabled Instant
Zone 2 Instant Relay 1 Enabled Instant
Zone 3 Instant Relay 1 Disabled Instant
Zone 4 Instant Relay 1 Disabled Instant
Zone Lockout NA Not Mapped Enabled
GSM Instant (Disabled by Default) Relay 2 Disabled
GPRS Instant (Disabled by Default) Relay 2 Disabled
Poll Fail NA Relay 2 Disabled 90 seconds
ComWatch Instant Relay 2 Enabled Option 5
Fault Outputs
There are four mapping options for the 2 on board
relays:
1� Not Mapped - The relays are able to be
remotely controlled via SMS and GPRS
2� Communications - Communications has not
worked for the programmed period of time