MULTICOM 4 PLUS, Руководство по установке, Страница: 16 / 29

30 31 Panel Programming Methods Panel Programming Methods
2� To enter Program Mode press the * key. You
will hear a busy tone. Enter the default
Program Access Code (
1345 ) followed by
# . When a successful code is entered you
will hear a dial tone. You are now in the
program mode.
eg. *1345#.
See Option
40 to change the Program Access Code.
3� To send a command , follow the
Programming Options table, using the DTMF
row as a guide. Commands with PSTN/DTMF
are sent using the template:
*ADDRESS SETTING #
eg. *01ABCD#
4. The Multicom will reply with a dial tone if
your option was updated successfully� The
Multicom will reply with a congested/busy
tone if an error was encountered.
5. To exit program mode press ##. Your 4 Plus
will also automatically exit program mode
DIWHUÀYHPLQXWHVRILQDFWLYLW\
DTMF using Phone Handset/Butt
1� Connect the Phone butt to the “Panel”
socket. You will hear a dial tone.
Once connected to the GPRS network,
the 4 Plus can also be programmed
remotely by either your monitoring centre
or from the Suretek National Operations
Centre�