MULTICOM 4 PLUS, Руководство по установке, Страница: 23 / 29

45 Multicom Format Template 44 Multicom Format Template
* 7KLVÀHOGLV not used by the Multicom 4 Plus but may
be used by other products in the Multicom range.
Event CID Offset (Zone) Description
GPRS Fault Alarm 18 X 950999 08 GPRS has been unable to communicate with the
servers for the programmed period of time
Eth Fault alarm * 18 X 950999 09 Ethernet has been unable to communicate with
the servers for the programmed period of time
AC power Fault * 18 X 950999 10 AC has not been detected for the programmed
period of time
Test Report 18 X 950999 11 Test report occurs at the programmed interval
Poll Alarm 18 X 950999 12 Unable to poll for the programmed period of
time
PGM Update 18 X 950999 13 Remote software update
$ODUPEXIIHU2YHUÁRZ 18 X 950999 14 The 4 Plus previously had too many Contact ID
alarms in its buffer, some alarms have been lost
COMM's Failure 18 X 950999 15 Multicom was previously unable to
communicate some alarm events
Service Required 18 X 950999 16 Contact your supplier for servicing requirements.
Zone Lock out 18 X 950999 17 One or more zones has repeatedly been
triggering in a short period of time, this will lock
out the event until the zone stops repeatedly
triggering.