Multibor Podolog, Руководство пользователя

Страница: 10 / 24

Changing the tools in the MAX configurations
1. Switch off the tool rotation
2. Wait until the tool rotation stops completely
3. Use your hands to
turn the upper part
(orange color) into the
"A" direction over 2
clicks. One click is not
enough since this is an
intermediate position
4. Click twice until locked in
5. Extract the old tool
6. Set the new tool
into the clamp
7. Turn the clamp lock into the "B" direction over two clicks
Pedal
The pedal is intended for activating and deactivating the rotation
function with the help of a foot. Depending on the configuration
option, the pedal may sometimes not be a part of the equipment
supplied. However, users can purchase the pedal as a separate piece
of equipment.
10
The shank end of a tool must be set into the clamp deeply until
locked. Another manner of tool setting leads to vibration, to
accelerated wear of the clamp and of the handheld milling cutter,
and to damage to the tool. Such operation of the Milling Cutter along
with the usage of unbalanced tools (vibration while operating the
handheld milling cutter) results in the loss of the warranty rights for
the user.
Changing the tools
1. Switch off the tool rotation
2. Wait until the tool rotation stops completely
3. Use your hands to
move the clamp lock
into the '
R
' direction.
4. You must hear
a distinctive click
5. Extract the old tool
6. Set the new tool
into the clamp
7. Use your hands
to move he clamp lock
into the ' S ' direction
until a distinctive click is heard