Multibor Podolog, Руководство пользователя

Страница: 2 / 24

PROFESSIONAL TOOLS
Before getting started, please read this User Guide carefully.
Attention! The device has sufficient means of electronic protection,
but no automation is able to provide 100% safety against unjustified,
inept or destructive steps by the User.
Please remember!
Before you switch on the rotation, make sure that
nothing stands in its way, the engine is free, there is a tool in the
collet clamp, the collet clamp is locked, and the collet holds the tool
firmly.
Caution!
Mechanical defects in the entire device or in separate parts
thereof and absence of its components as well as damaged or burnt
engine or its power cable shall deprive the User of the opportunity of
free repair and shall not impose any warranty obligations upon the
Manufacturer.
Please handle the device with due care and use it as prescribed. Do
not allow for excessive workload and do not use it for operations the
device is not intended for, and it will then serve you very well for
years!
Should you have any questions regarding the use of the device or
should you put the device into such modes of operation where from
you don't know the way out, please contact the Service Center.
Service Center
www.multibor.eu
2
Please note the following:
The progrms for “MULTIBOR Pedicure Bits” and program for the “Pedicure” are different. If you work with replaceable sand caps
based on rubber or with
sintered cersmics, please select the “Pedicure” only. If you try to activate the “MULTIBOR Pedicure Bits”,
there is a risk that your tool bends or breaks down/
Carbide ball o2 mm Removal of a corn callus
Lateral nail folds soft abrading
Final foot polish
Removing of corns and rough skin on toes
On the edge of step cracks treatment
For a basic step's cracks treatment
Rough skin intensive abrading
Very rough heels primary treatment
Abrasive, silicone, max o9 mm
For toes abrading
Abrasive, silicone, max o13 mm
The step's skin grinding
Silicone, max o10 mm The natural nail polishing
Diamond cylinder, max o5 mm
Lateral nail folds
Diamond flame, max o3.3 mm Removal of pterygium
Diamond ball, max o3.3 mm Eponychium treatment
Tool Name Display
Type