Multi-Tech RouteFinder RF802EW, Руководство пользователя

Страница: 51 / 141

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Chapter 5 - Telnet
51
Login Script
Select Enable or Disable.
Edit login Script
Refer to the RouteFinder Manager chapter of this User Guide for information on editing
scripts.
External IP Address
Enter the IP address of the remote device to which you are connecting.
NAT Function
Select Enable or Disable. Refer to the Glossary in this User Guide for additional information
on NAT.
Assign Remote IP
Select Enable or Disable. If you select Enable, you will be prompted to enter an address to
be assigned to the remote system.
Remote Access
To configure the async port for Remote Access, enter values for each of the following:
IP Assigned Method
Select the method the client will use to have their IP address assigned.
Protocols
Default value is Both IP and IPX enabled . You may select to use only one protocol,
however if you are connecting to a Netware server, you must have IPX enabled.
IPX/SPX Frame Type
The default value is Autodetect . If you have problems with your network connection, you
may select Ethernet_II, Ethernet_802.3, Ethernet 802.2 or Ethernet_snap.
Authentication Method
Select either None, PAP or CHAP. Refer to the RouteFinder Manager chapter of this User
Guide for additional information.
Edit User Database
To add users to the database, select the next available letter. Enter the User Name,
Password and Callback type for each user that you add to the database. You may enter up to
64 remote clients.
Idle Timeout
The default value is 5 minutes.
Serial Baudrate
Select one of the available options. You may need to use a slower speed to ensure a quality
connection.
Modem Pre-initial string
Refer to your modem or ISDN TA User Guide for information. The default value will work for
most analog modems.