Multi-Tech RouteFinder RF802EW Скачать руководство пользователя страница 131 | Manualshive

Страница: 131 / 141

background image

131

Appendix A

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide

Appendix A - Regulatory Compliance Information

Class B Statement

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

·

Reorient or relocate the receiving antenna.

·

Increase the separation between the equipment and receiver.

·

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

·

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numerique de la classe B respecte toutes les exigences du Reglement Canadien sur le
materiel brouilleur.

EMC and Safety Directive Compliance

The CE mark is affixed to this Multi-Tech product to confirm compliance with the following European
Community Directives:

Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States
relating to electromagnetic compatibility.

and

Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member
States relating to electrical equipment designed for use within certain voltage limits:

each amended by Council Directive 93/68/EEC of 22 July 1993 on the harmonization of CE marking
requirements.

«
...
129
130
131
132
133
...
»

Содержание RouteFinder RF802EW














































































































































Отзывы:

Нет отзывов

Похожие инструкции для RouteFinder RF802EW

Бренд: Ublox Страницы: 44

Бренд: Ubiquiti Страницы: 32

ExtremeWireless AP4000

Бренд: Extreme Networks Страницы: 33

Бренд: Grandstream Networks Страницы: 25

Бренд: jbmedia Страницы: 6

Бренд: NETGEAR Страницы: 2

Бренд: Sena Страницы: 82

Бренд: MFOURTEL Страницы: 19

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 38

Бренд: QTech Страницы: 24

Бренд: PoeWit Страницы: 5

Бренд: XtendLan Страницы: 71

Бренд: HPE Страницы: 3

Бренд: Nortel Страницы: 26

Бренд: Nordic ID Страницы: 8

Бренд: Vibe Страницы: 44

Technicolor DWA0120

Бренд: Home Telecom Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды