Multi-Tech MultiModem ISIHI-2S, Руководство пользователя

Страница: 184 / 186

184 MultiModem ISI Hybrid Series, ISIHI-2S
Index
I
in-band escape sequence, 81
Inactivity Timer command, 75
Information Request command, 78
installation, 16, 17
Internet, 2
IRQ Jumpers, 52
ISDN Solutions Group, 138
L
Line feed character, 104
line feed character, 84
List Telephone Numbers command, 108
Load Default Configuration command, 71
Load Profile command, 91
Local Flow Control command, 79
Local Flow Control Selection command, 79
long space break, 75
Long Space Disconnect command, 75
Loop Qualification, 137
M
manual organization, 10
maximum dial line rate, 86
memory
nonvolatile (NVRAM), 65, 71, 88
read-only (ROM), 65, 71
Messages
response, 106
ML-PPP protocol, 95, 161
Modem Port Flow Control command, 80
Modulation Handshake, 75
Monitor Speaker Mode command, 82
Monitor Speaker Volume command, 82
N
National ISDN Council (NIC), 143
National ISDN Users Forum (NIUF), 143
Network switch type
AT command, 93
NI-1 switch type, 93
NVRAM (nonvolatile random access memory), 65, 71, 88
O
off-line time, 87
On-Hook/Off-Hook command, 67
Online command mode, 107
online connection commands, 74
online mode, 64, 81, 83
Ordering Codes (IOCs), 138
Ordering ISDN Without IOCs, 140
Overlap sending, 92
P
pacing, 79, 80
Pacing commands, 98
parameters, 64, 65, 71
default, 65, 76
PBX phone systems, 67, 68
Persistent DTR Dialing command, 100
Profiles
Quick Setup, 98
pulse ratios, setting, 149
Pulse-Dial command, 68
Q
Quick Setup, 98
Quiet Answer command, 69
R
Rate adaption protocol
AT command, 95
Recommended Base I/O Addres and IRQ Values, 18
redial last number, 67
reliable mode, 77
Repeat Last Command command, 78
Reset Modem command, 71
Response messages, 106
Result codes, 72
Connect Messages command, 96
extended codes, 73
result codes, 65, 72, 73
enable/disable, 72
extended codes, 73
verbose/terse selection, 72
Result Codes (Verbose/Terse) command, 72
Result Codes and Call Progress Selection command, 68
Result Codes Enable/Disable command, 72
return character, 84
Return Online command, 102, 160
Return to Command Mode command, 69
Ring count, 103
rings
counting, 83
number till answer, 83, 87
Rings, number before answering, 103
ROM (read-only memory), 65, 71
RS-232C, 76
controls, 76
RTS/CTS flow control, 97
S
S-registers, 87, 103
definition, 83
reading, 87
S0, 83, 87, 101, 108, 159
S1, 83
S10, 85, 97, 99, 162