Multi-Tech MultiModem ISIHI-2S, Руководство пользователя

Страница: 17 / 186

MultiModemISI Hybrid Series, ISIHI-2S 17
Hardware Installation
Before You Start
Warning: Direct interconnection (or connection by way of other apparatus) of ports
marked SAFETY WARNING see instructions for use with any other ports (whether
similarly marked or not) may produce hazardous conditions on the network. Multi-Tech
strongly urges you to consult a qualified engineer before attempting to make this type of
connection.
• All installation must be done by a qualified service person.
• To reduce emissions, use blanking plates to cover empty slots in the your PC.
• Cable, wiring, and any other apparatus connected between the modem and the point of
connection to any speech band circuit shall comply with the following:
1. The overall characteristics of the apparatus shall be such as to introduce no material
effect upon the electrical conditions presented to one another by the modem and the
speech band circuit.
2. The apparatus shall be comprised of only
a. apparatus approved for the purpose of connection between the modem and a
speech band circuit; and
b. cable and wiring complying with a code of practice for the installation of
equipment covered by this part of BS 6328 or such other requirements as may be
applicable.
Note: Such apparatus may have been approved subject to limitations in its use.
Note: If S/T-interface ISDN network connection cable is used, the ISDN phone cord
should be connected between the ISDN network connection cable and NT1 device.