Multi-Tech MultiModem ISIHI-2S, Руководство пользователя

Страница: 102 / 186

102 MultiModemISI Hybrid Series, ISIHI-2S
Chapter 5—TERMINAL ADAPTER AT Commands, S-Registers, Result Codes
T
erminal Adapter
&Zn=x Store Telephone Number
Values: n = 0–9; x = dial string
Default: n/a
Allows you to store a telephone number in a memory register for faster dialing. To store a
number, type
&Z, the register number (0–9) where you want to store the number, the =
character, and the dialing string you want stored. Then press E
NTER
. The dialing string
can have up to 80 characters. To read a stored number, type AT&Zn? (e.g., AT&Z4?)
where
n is the number of the register you want to read. To display a list of all numbers
stored in memory, type ATL and press R
ETURN
:
0 14082345678
1 16125551212
2 14089876543
3
4 6313551
5
6 4258513
7
8 16126313550
9 12138880123
DSn Dialing a Stored Telephone Number
Values: n = 0–9
Default: n/a
To dial a stored telephone number, type ATDSn in terminal mode, where n is the location
of the number you want to dial. For example, typing ATDS6 <cr> dials a telephone stored
in memory register 6 location.
$Dn Persistent DTR Dialing
Values: n = 0, or 1
Default:
$D0 (Disabled)
Enables or disables persistent DTR dialing (PDD). PDD causes the terminal adapter to
automatically and continually redial stored telephone number 0 when the port has no
active calls and DTR is high.
%En Escape Sequence Options
Values: n = 0–5
Default:
%E1 and %E4
By default, the modem responds only to the +++ escape method. However, you can use
the
%E command to set the modem to respond only to the <break> method, to respond
to ++ or the <break> method, or to ignore both methods and not escape.
%E0 Modem won’t escape
%E1 +++ escape method
%E2 <BREAK> escape method
%E3 Both +++ and <BREAK> escape methods