Muller Elektronik ECU-MAXI 3.0, Инструкция по установке и эксплуатации

Страница: 4 / 58

Table of contents
4 V1.20190404 3030383000-02-EN
6.2.1 Raising and lowering the air cushions 26
6.2.2 Lifting and lowering the boom 26
6.2.3 Folding and unfolding the boom 27
6.2.4 Extending and retracting the boom 29
6.3 Starting application 29
6.4 Regulating the application rate 30
6.4.1 Changing the application rate in manual mode 30
6.4.2 Using Automatic mode 31
6.4.3 Setting target rate 32
6.4.4 Stopping application 33
6.5 Operating sections 33
6.6 Operating the spraying area via the boom display 33
6.7 Adjusting the chassis 34
6.7.1 Adjusting the axles 34
6.7.2 Sloping the implement 35
6.8 Documenting work results 35
6.9 Switching the fans on and off 36
6.10 Switching the air compressor on and off 36
6.11 Operating the ME joystick 37
6.11.1 Preview mode for the ME Joystick 38
6.11.2 Viewing the assignment of the joystick 38
6.12 Operating additional functions 39
7 Configuring the job computer 40
7.1 Entering sprayer parameters 40
7.1.1 “Target Rate” parameter 40
7.1.2 “Product” parameter 40
7.1.3 “Working Width” parameter 40
7.1.4 “Wheel Impulses” parameter 40
7.1.5 “Minimum Pressure” parameter 40
7.1.6 “Maximum Pressure” parameter 41
7.1.7 “Sprayer off Below” parameter 41
7.1.8 “Regulation off Below” parameter 41
7.1.9 “Regulation Factor” parameter 41
7.1.10 “Tank Size” parameter 41
7.1.11 “Tank level alarm” parameter 42
7.1.12 “Impulses Main Flow” parameter 42
7.1.13 “Circulation Type” parameter 42
7.2 Configuring the control units 42
7.3 Calibrating the flow meter 43
7.3.1 Calibrating the flow meter with the tank method 43
7.3.2 Calibrating the flow meter with the nozzle method 45
7.3.3 Manually entering the number of impulses per liter for the flow meter 47
7.4 Configuring products 47
7.5 Selecting and configuring the speed sensor 47
7.5.1 Selecting the speed source 47
7.5.2 Calibrating the speed sensor with the 100m method 48