7
Configuring the job computer
Calibrating the flow meter
44
V1.20190404
3030383000-02-EN
2.
Weigh the tank.
3.
Switch to the “CALIBRATION” screen:
>
>
>
⇨
The following screen appears:
4.
- Select the tank method.
⇨
The following screen appears:
5.
- Start application
⇨
During application, the number of impulses will be counted on the “CALIBRATION – Main
flow meter” screen.
6.
Apply a few hundred litres. Do not fully empty the tank. This prevents air bubbles from forming
and distorting the results.
7.
- Stop the application.
⇨
The application will be stopped.
⇨
No impulses are counted on the display.
8.
- Stop calibration.
9.
Weigh the tank.
10.
Enter the applied quantity in litres on the “Enter water volume” line.
11.
- Exit the screen.
