Muddy the Liberty MTP3000, Инструкция по эксплуатации

Страница: 11 / 16

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM standard F2123 - Standard Practice for Treestand Instructions.
ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
11
Middle Ladder
Section
Bottle Ladder
Section
B
B
Top Ladder
Section
Top Ladder
Brace
B
B
B
B
G
G
G
G
G
G
G
Standing
Platform
STEP 12.
With the stand laying down, attach the
top ladder braces
to the
standing platform
using (8) 5/16’’ x 2 3/4’’ hex
bolts [G], (16) nylon washers and (8) 5/16’’ nylock nuts. Insert the
top ladder section
into the
top ladder braces
, connect
using (2) 1/4’’ x 1 1/2’’ hex bolts [B], (2) nylon washers and (2) 1/4’’ nylock nuts. Then connect the
middle ladder section
and bottom ladder section using (4) 1/4’’ x 1 1/2’’ hex bolts [B], (4) nylon washers and (4) 1/4’’ nylock nuts.
FIG. 8
WARNING! Never attempt to hunt from an
unlevel platform. Additionally, never attempt
to level your freestanding platform treestand at
heights above the ground. If you find your platform
is unlevel, canted or angled awkwardly upward or
downward, or in any configuration other than level,
readjust your freestanding platform treestand as
necessary to alleviate this awkward angle. Failure
to follow these instructions may result in serious
injury or death!
WARNING! Make certain
the snap pins are engaged and
the “wire keeper” is secured with
each use. Failure to follow these
instructions may result in serious
injury or death!