Muddy the Liberty MTP3000, Инструкция по эксплуатации

Страница: 12 / 16

ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM standard F2123 - Standard Practice for Treestand Instructions.
12
X-Support
X-Support
X-Support
X-Support
X-Support
Top Ladder
Section
Middle Ladder
Section
Bottom
Leg
Section
Bottom
Leg
Section
Top Leg
Section
Bottom Ladder
Section
D
D
D
D
D
D
D
D
D
D
D
D
X-Support
STEP 13
. Assemble all (6)
X-supports
by inserting one
male x-support
into one
female x-support
and secure using (6) 1/4’’ x 1 1/4’’
hex bolts [A], (6) nylon washers and (6) 1/4’’ nylock nuts.
Female X-Support
Male X-Support
A
STEP 14
. Attach the
X-supports
by securing two (2)
to each
top leg section
and
top ladder section
using
(6) 5/16’’ X 1 1/2’’ hex bolts [D], (12) nylon washers and
(6) 5/16’’ nylock nuts. Then, connect the X-supports
to the bottom leg sections and bottom ladder
section secure using (6) 5/16’’ X 1 1/2’’ hex bolts [D],
(12) nylon washers and (6) 5/16’’ nylock nuts.
FIG. 9
FIG. 10
NOTE:
The female x-support has a sleeve
and the male x-support does not.