attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
10
Tether
Tether
Loop
Tether
Loop
Three
Bar
Buckle
Three
Bar
Buckle
Front View
Rear View
SRD Strap
Right
Waist
Loop
Right
Leg Strap
Right
Leg Strap
Left
Leg Strap
Left
Leg Strap
Left
Waist
Loop
Tether
SRD Strap
WarnInG!
rEaD tHEsE MuDDY® Full-BoDY Fall arrEst HarnEss InstructIons carEFullY anD FolloW all tHE InstructIons!
Your nEW Full-BoDY Fall arrEst HarnEss Is DEsIGnED For a MaxIMuM caPacItY (usEr anD EquIPMEnt) oF 300 PounDs
(136 kg). aDDItIonallY, Your nEW Full-BoDY Fall arrEst HarnEss Must BE rEPlacED aFtEr tHrEE (3) YEars oF sErVIcE! rEPlacE
Your Full-BoDY Fall arrEst HarnEss IMMEDIatElY sHall You ExPErIEncE a Fall WHIlE WEarInG It.
WarnInG!
use the Muddy® full-body fall arrest harness provided with this product or a harness that complies with tMa standards. notE:
You must store your full-body fall arrest harness out of direct sunlight and out of any other harsh environmental condition(s) that may adversely
affect its performance. Failure to follow these instructions may result in serious injury or death!
stEP 1.
Identify the main
parts of the full-body
fall arrest harness (Fig.
1). Hold the full-body
fall arrest harness by the
tether loop insuring the
harness is upright and leg
straps are hanging down.
Straighten any parts that
have become twisted.
Full-BoDY Fall arrEst HarnEss InstructIons
stEP 3.
Feed the
left leg strap
between legs
and thread
through the
bottom left
waist loop.
Repeat with
the right leg
strap, feeding
between legs
and through
right waist
loop (Fig. 3).
stEP 4.
Secure the two leg straps by threading
the three bar buckle (Fig. 4). Tighten the leg
straps snuggly.
Do not
over tighten as this will
cut off the circulation to your legs. The Muddy®
full-body fall arrest harness shall look like the
one depicted in Figure 6 when donned correctly.
WarnInG!
It is very important to complete
this step of the assembly. an improperly
secured buckle may cause full-body fall arrest
harness failure resulting in serious injury or
death! If there is not enough strap available
to complete this step, Do not usE tHIs Full-
BoDY Fall arrEst HarnEss! You may need to
purchase and use a larger specialty sized full-
body fall arrest harness that complies with tMa
standards.
Slot A
Left
Leg
Strap
Right
Leg
Strap
three Bar
Buckle
Up through Slot B
Down through Slot A
Down through Slot B
Pull tight to secure
Back over top
Slot B
shoulder
strap
shoulder
strap
shoulder
strap
shoulder
strap
Leg Strap
waist
belt
Leg Strap
shoulder
strap
shoulder
strap
shoulder
strap
shoulder
strap
Leg Strap
waist
belt
Leg Strap
FIG 1
FIG 2
FIG 3
FIG 4
stEP 2.
Insert arms
through each shoulder
strap (Fig. 2).
