MTW BELARUS 952.5, Руководство оператора, Страница: 111 / 188

952.5-0000010 OM
111
4.4.3 Drawbar hitch DH- З V (long towing yoke)
Figure 4.4.2 – Installation variants scheme of DH- З V (long towing yoke)
Table 4.3 – Basic parameters and coupling dimensions of DH-3V
(long towing yoke)
Standard size (configuration) DH-3V (long towing yoke)
1 Mounting location Rear lifting device
2 Design features
Rotational, height adjustable
3 Purpose For connection and coupling of trailed
implements, including of tractor trailers
equipped with drawbar clevises
4 DH yoke dimensions, mm:
а ) connecting pin diameter
b) yoke position
1)
for the implements driven
by rear PTO shaft
c) distance between PTO shaft end exten-
sion and connection pin axis
30
Lowermost position as it is shown in
Figure 4.4.2
400
5 Trailing appliance for connection to DH:
а ) type Rigid, with tractor drawbar clevis
b) vertical load in hitch point, kN, not more
than
12
c) trailing appliance steering angle in hori-
zontal plane, degrees, not less than
±60
d) protective mean type Safety chain (rope)
2)
e) connection point of a protective mean to
the tractor
Lifting device bores
__________________________________________________________________________________________________
1)
Recommended.
2)
Implement accessories.
ATTENTION: IT IS FORBIDDEN TO PUT DH-3V YOKE TO A POSITION WHERE
ITS BODY OVERHANGS THE DH SUPPORTING BRACKET END FOR MORE THAN
15 ММ !