manualshive.com logo in svg

MTU 12 V 4000 M23F, Руководство по эксплуатации

Поделиться
Скачать
MTU 12 V 4000 M23F Скачать руководство пользователя страница 239

6.15.5 Engine coolant – Filling

Preconditions

☑

Engine is stopped and starting disabled.

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Engine coolant

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!

• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

NOTICE

Cold coolant in hot engine can cause thermal stress.

Possible formation of cracks in the engine!

• Fill / top up coolant only into cold engine.

Preparatory steps

1.

Turn breather valve on expansion tank (for
engines with remote heat exchanger: the
expansion tank is part of the remote cool-
ing system) counterclockwise up to the
first stop and allow pressure to escape.

2.

Continue to turn breather valve counter-
clockwise and remove.

MS150068/01E 2014-01

| Task Description | 239

TIM-ID: 0000014569 - 005

Содержание 12 V 4000 M23F
































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды