manualshive.com logo in svg

MTU 12 V 4000 M23F, Руководство по эксплуатации

Поделиться
Скачать
MTU 12 V 4000 M23F Скачать руководство пользователя страница 234

6.15.2 Engine coolant level – Check

Preconditions

☑

Engine is stopped and starting disabled.

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!

• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

Checking engine coolant level at filler neck:

1.

Turn breather valve on coolant expansion tank (for engines with remote heat exchanger: the expansion
tank is part of the remote cooling system) counterclockwise up to the first stop and allow pressure to
escape.

2.

Continue to turn breather valve counterclockwise and remove.

3.

Check coolant level (coolant must be visible at the bottom edge of the cast-in eye in the filler neck).

Checking engine coolant level at
external cooler:

1.

Check coolant level (coolant must be visi-
ble at marker plate).

2.

Top up with treated coolant as necessary
(→ Page 239).

3.

Check and clean breather valve.

4.

Set breather valve onto filler neck and
close it.

Checking engine coolant level by means of level sensor:

1.

Switch on engine control system and check readings on the display.

2.

Top up with treated coolant as necessary (→ Page 239).

234 | Task Description | MS150068/01E 2014-01

TIM-ID: 0000014605 - 003

Содержание 12 V 4000 M23F
































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды