MTS Systems Landmark 370 Series, Операция

Страница: 34 / 134

System Introduction
34 Landmark™ Test System Operation
Setting Up Meters
Meters allow you to monitor displacement and forces. Using the following windows, you can set up
multiple meters and arrange them to your liking. Meter types include Timed, Running Max/Min, and
Peak/Valley.
Applying Power to the Station
The interlock and power sections of the main window are located together for convenience. There, you
can reset or override interlock conditions as well as power up the hydraulic pump unit (HPU) and
hydraulic service manifold (HSM).
Note: The HPU will not be visible in all installations such as the one shown in the following
illustration.
Moving the Actuator
During setup, you must move the actuator so that you can clamp the specimen in the grip. The Manual
Command window allows you to move the actuator directly, or in fine or super fine increments.