MTP 1750 Series, Руководство пользователя

Страница: 9 / 50

Series 1750 Bedding Dispensers
61301604063 vii
Safety Features
WARNINGS SUMMARY
The following warnings apply to general operation of the
bedding dispenser. Keep them in mind as you operate the
unit:
•
FALL HAZARD:
Areas located immediately around the bedding
dispenser may become a fall hazard due to water drippage.
For a safe environment, ensure the floor is kept clean and
dry.
•
PERSONAL HAZARD AND EQUIPMENT DAMAGE
: Safe and efficient
operation of this equipment requires scheduled preventative
maintenance. Routine adjustments and replacement of parts
by other than authorized maintenance personnel may result
in personal injury or cause the equipment to perform to less
than its capabilities.
•
SHOCK HAZARD
: Before performing any service or
maintenance on the washer, disconnect all utilities and follow
the lockout/tagout procedures to ensure safety and prevent
accidental shock.
PERSONNEL SAFETY
The following safety features have been installed to protect the operator.
Load Conveyor Clutch
The load conveyor is driven through a clutch to prevent motor failure in the
unlikely event that the conveyor becomes jammed and/or obstructed. The
clutch has been properly set by Getinge/Castle, Inc., upon shipment of the
unit and should only be adjusted by an authorized service technician that is
familiar with the equipment.
Load Hopper Safety Shut-off
The load hopper has a safety gate to prevent the operator from contacting
the conveyor. Removing the grid activates this safety shut-off switch and
stops both the dispenser drive and the load conveyor.
Top Access Panel Safety
Shut-off
The top access panel also has an automatic safety shut-off switch.
Removing the top access panel activates the safety shut-off switch and
stops both the dispenser drive and the load conveyor.
WARNINGS