MTP 1750 Series, Руководство пользователя

Страница: 29 / 50

61301604063 4–1
Section 4 Maintenance
GENERAL MAINTENANCE SCHEDULE
The customer is responsible for these maintenance items at the intervals
specified. Optional items may require additional maintenance. Refer to your
Customer Manual for this information.
SERVICE
REQUIRED
HOW
OFTEN?
PROCEDURE
Ensure proper bedding
supply. As
needed
1. Lift the hopper lid and examine
the bedding level.
2. Fill the hopper with bedding if
necessary.
Inspect the fill level of
the dust collector
(if dust collector option
is installed)
.
Daily
1. Turn OFF the power to the dust
collector.
2. Check the level of debris in the
lower bag.
3. Empty the dust collector if
necessary.
Clean the washable
inline filter
(if dust collector option
is not installed)
.
Daily
1. Prepare a bucket of water
large enough to fit the inline
filter.
2. Remove the inline filter using
the handle.
3. Immerse the inline filter in the
bucket.
4. Agitate the inline filter in the
water to remove dirt.
5. Air-dry the inline filter.
6. Replace the inline filter in the
line.
Apply lubricant to the
grease fittings. Six (6)
Months
Apply one shot of all-purpose
grease to each of the grease
fittings (see Figure 4–1.)
PERFORMANCE
ASSURANCE PLAN
Preventive maintenance
performed by factory-trained
service representatives, using
authorized parts and service
techniques, is recommended.
Recognizing symptoms of
potential trouble and making
corrections immediately is less
costly and time consuming than
repairing damaged equipment.
Our Performance Assurance Plan
offers scientific maintenance, not
merely repair service.
For quality service on this
equipment and information on
our Performance Assurance
Plan, contact Getinge/Castle, Inc.
1777 East Henrietta Road,
Rochester, NY 14623-3133 or
call 1-800-950-9912.