Priming the Smoke Unit
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (shown below). We recommend M.T.H. ProtoSmoke™ fluid. Do not
overfill the unit or the fluid may leak out and coat the interior engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to
run smoke-free), turn off the smoke unit by turning the smoke unit control to the
“OFF” position, fully Counter Clockwise position.
Failure either to add fluid to
the smoke unit or to turn it off may damage the smoke unit heating element
and/or wicking material.
Premier
Diesel Engine with PS-2 and Proto-Scale 3-2
4
3GS-21B GenSet
Running the engine without a primed
smoke unit may cause damage
Smoke Unit Control
Adding Smoke Fluid
Smoke Unit Control
Lift cover to access controls
Add Smoke Fluid
Opened Smokestack lid
Closed Smokestack lid
Make sure that the smokestack lid is open before adding the smoke fluid. You only
need to add smoke fluid to one of the two smokestacks nearest the cab.
