MTD WOLF Alpha 95.165 H, Руководство пользователя

Страница: 17 / 284

17
Operation
EN
Setting the motor speed
Q
You can set the motor speed with infinite variability
using the throttle.
Fast motor speed =
Slow motor speed =
Starting the motor
Note
The choke
M
is used for starting the device
when the motor is cold. Some models do
not have a choke. The motor prepares itself
automatically for the relevant start process.
Î
Open the fuel tap (if present, see motor manual).
Î
Sit yourself down on the driver's seat.
Î
Switch off the cutting mechanism.
Î
Engage the parking brake.
Î
Set the throttle to .
Î
If the motor is cold , pull the choke / set the
throttle to .
Î
Actuate the ignition key
H
(depending on the igni-
tion lock):
Î
Insert the ignition key into the ignition lock [3] .
Î
Turn the ignition key to until the motor starts
running. Release the ignition key.
Î
The ignition key stays in the normal position.
(Mowing in a forward direction)
a
.
or
Î
Insert the ignition key [3] in the ignition lock
and press it downwards for at least 1.5 seconds
until the motor starts running.
Î
Release the ignition key.
3
The ignition key stays in the normal position.
(Mowing in a forward direction)
b
.
Note
A start attempt should last a max. of 5
seconds. Wait 10 seconds until the next
attempt.
Note
The OCR function must not be activated
during the start process (see section "OCR
function).
Î
Reset the choke or the throttle until the motor runs
smoothly.
Stopping the motor
Î
Set the throttle to the mid-throttle point.
Î
Let the motor run for approx. 20 seconds.
Î
Set the ignition key (model-dependent) to
Ha
or press the ignition key downwards and release it
Hb
.
Î
Remove the ignition key.
Driving
WARNING !
Risk of sudden start-up, sudden stopping
and driving with excessive speed
Â
Risk of accident
¾
Start up slowly and brake slowly.
¾
Do not drive at excessive speed.
¾
Never change the driving direction
without first bringing the device to a stop.
Î
Release the parking brake by stepping down fully
on the brake pedal and then releasing it again.
Î
To drive away, step on the accelerator pedal.
Note
The further down on the accelerator pedal
you step, the faster the device will move.
Driving with cruise control
N
Î
Press the switch while driving.
3
The forward speed selected at that point in time
(but not the maximum speed) is maintained.
3
You can take your foot off the accelerator pedal.
Î
To deactivate cruise control, step on the brake
pedal / accelerator pedal until the switch is re-
leased again.
Stopping the device
A
Î
Take your foot off the accelerator pedal C or D .
Î
Step on the brake pedal Q until the device comes
to a standstill.
Note
When you step on the brake pedal, you
simultaneously switch the cruise control off.