TECHNICAL DATA
Parameter description
Parameter value
Product name
GASOLINE
CUT-OFF MACHINE
Model
TS-2500
Rated power [W]
2200
Dimensions [mm]
720x250x375
Weight [kg]
9,5
Cubic capacity [cm
3
]
54
Fuel tank capacity [ml]
550
Idle speed [rpm]
3170
Fuel mixture ratio
40:1
Maximum cutting depth [mm]
83
Mileage [l/h]
1,9
Maximum cutting speed [rpm]
5000
Maximum engine speed [rpm]
12500
L
wa
[dB]
119
The terms "device" or "product" are used in the warnings
and instructions to refer to GASOLINE CUT-OFF MACHINE.
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device generates
sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
U S E R M A N U A L
EN
10
Rev. 09.02.2021
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Use ear protection. Exposure to loud noise
may result in hearing loss.
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
Wear protective gloves.
Wear head and face protection.
Wear foot protection.
Use an adjustable guard.
ATTENTION! Loud noise warning!
ATTENTION! Rotating parts, entanglement
hazard!
ATTENTION! Fire hazard - flammable
materials!
WARNING! Toxic substances, danger of
poisoning!
ATTENTION! Hot surface, risk of burns!
CAUTION: Observe a safe distance from
nearby bystanders.
CAUTION! Sharp elements. Limb cut hazard.
Do not smoke near the device. The device
contains flammable substances.
CAUTION! Harmful fumes.
Do not operate the device in a closed room!
CAUTION! Shards!
Die originale Anweisung ist die deutschsprachige Fassung.
Sonstige Sprachfassungen sind Übersetzungen aus der
deutschen Sprache.
2. NUTZUNGSSICHERHEIT
HINWEIS!
In der vorliegenden Anleitung sind
Beispielbilder vorhanden, die vom tatsächlichen
Aussehen das Produkt abweichen können.
ACHTUNG!
Lesen Sie alle Sicherheitshinweise und
alle Anweisungen durch. Die Nichtbeachtung der
Warnungen und Anweisungen kann zu schweren
Verletzungen bis hin zum Tod führen.
g)
Use the device in a well-ventilated space.
h) The device produces dust and debris during
operation. It is important to protect bystanders from
their harmful effects.
i)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
j)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
k)
Keep packaging elements and small assembly parts in
a place not available to children.
l)
Keep the device away from children and animals.
m) If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
n)
Before starting work, clean the area of any objects that
may damage the device or be thrown away and injure
the operator or bystanders.
o)
It is advisable to work in natural light or in artificial
light with good visibility.
p) Do not use in very humid environments or in the
direct vicinity of water tanks.
q)
Prevent the device from getting wet.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e) Use personal protective equipment as required
for working with the device, specified in section 1
(Legend).
The use of correct and approved personal protective
equipment reduces the risk of injury.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Remove all adjusting tools or spanners before turning
the device on. A tool or spanner left in the revolving
part of the device may cause injury.
i)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
j)
Hold the device with both hands!
k)
The device should not be used in bad weather, e.g.
strong wind, rain, storm or fog.
EN
11
Rev. 09.02.2021
l)
Do not use the product where it is impossible to take
a stable position, e.g. on a slippery surface.
m) To avoid operator fatigue, use the device in the
following cycles.
n)
Do not operate the device in a tree, on a ladder etc.
o)
Do not cut wood above shoulder height.
p)
The device’s handles must be clean, dry and free from
grease and oil.
q) WARNING! Risk of burns. The engine and exhaust
become hot during operation and are still hot shortly
after use.
r) During operation, the device generates an
electromagnetic field around itself, which may
cause erroneous operation of medical implants i.e.
pacemakers, etc.
s)
Do not put your hands or other items inside the
device while it is in use!
2.3. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
h) Avoid situations where the device stops working
during use due to excessive loading. This may result in
overheating of the drive elements and damage to the
device.
i)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to prevent stubborn grime
from accumulating.
l)
Do not work on two workpieces at the same time.
m) Do not cover the air intake and outlet.
n) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
o)
Keep the device away from sources of fire and heat.
p) Oil leaking from the machine should be reported
to the appropriate services or comply with legal
requirements applicable in the area of use.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
REMEMBER!
When using the device, protect children
and other bystanders.
