40
BIOS Setup
f
CPU GT Under Voltage Protection [Auto]
Sets the voltage limit for CPU GT under-voltage protection. If set to
Auto
, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
f
CPU Lite Load [Auto]
This item is used to reduce the CPU power and temperature under non-
overclocking and non-overvoltage conditions. Select higher mode if system is
unstable.
Auto
is the recommended.
f
CPU GT Over Current Protection [Auto]
Sets the current limit for CPU GT over-current protection. If set to
Auto
, BIOS will
configure this setting automatically.
f
CPU GT Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU GT voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to
Auto
, BIOS will configure this setting
automatically.
f
CPU GT VRM Over Temperature Protection [Enabled]
Enables or disables the CPU GT VRM for over-temperature protection. The CPU GT
frequency may be throttled when VRM temperature over the specified value.
f
CPU Core/ GT Voltage Mode [Auto]*
Sets the CPU Core/ GT voltage mode.
[Auto]
This setting will be configured automatically by BIOS.
[Adaptive Mode]
Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode]
Allows you to set the voltage manually.
[Offset Mode]
Allows you to set the offset voltage and select the voltage offset
mode.
[Ad Offset ] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Ov Offset ] Allows you to set the voltage and the offset voltage manually.
f
CPU Voltages control [Auto]
These options allow you to set the voltages related to CPU. If set to
Auto
, BIOS will set
these voltages automatically or you can set it manually.
f
DRAM Voltages control [Auto]
These options allow you to set the voltages related to memory. If set to
Auto
, BIOS will
set these voltages automatically or you can set it manually.
f
PCH Voltages control [Auto]
These options allow you to set the voltages related to PCH. If set to
Auto
, BIOS will set
these voltages automatically or you can set it manually.
