MSI MSI-3460 Скачать руководство пользователя страница 9

Страница: 9 / 60

Introduction

1.3 MSI3460 Annunciators

The

MSI-3460

uses blue and red LEDs to indicate weight mode and other

information.

MOTION

Blue LED - Indicates that the weight has not settled within the motion
window (usually ±1d).



While this symbol is illuminated, the scale will not zero, tare or totalize.

Center-of-Zero – Blue LED - Indicates the weight is within 1/4d of zero.

PEAK

Blue LED - Indicates the scale is in peak hold mode.

NET

Blue LED - Indicates the scale is in Net weight mode.



A tare weight is subtracted from the gross weight.

GROSS

Blue LED - Indicates the scale is in the Gross weight mode.



All hook weight is displayed minus any zero offset.

TOTAL

Blue LED - Indicates the scale is displaying the Total weight.



This is a temporary display lasting less than five seconds.

X1000

Blue LED - Usually used in conjunction with the TOTAL LED allows
accumulation of weight beyond the five digit display capacity.

LO BATT

Appears when approximately 10% of battery life remains and blinks
when automatic shutdown is imminent.

Red LED - Indicates weight display is in kilograms.

Red LED - Indicates weight display is in pounds.

SET POINTS

User programmable set points for early overload warnings.



Blue LED - Setpoint 1 and 2



Red LED - Setpoint 3

ACK

Acknowledge LEDs are used to provide feedback to the operator



Blue LED - Incoming remote commands have been received



Red LED - Light briefly once executed. Also used for acknowledging
successful Auto-Total operations.

Blue LED - Indicates carrier detect for RF remote display equipped

MSI-3460

. If the LED is illuminated,

MSI-3460

and remote display are

linked.



On units equipped with the RF remote control, the LED is illuminated
when a remote command is received and for the next half second.

Содержание MSI-3460





























































Результаты поиска

Содержание MSI-3460

Отзывы:

Бренды по названию

Популярные бренды

MSI MSI-3460, Руководство оператора

Результаты поиска

Содержание MSI-3460

Отзывы:

Бренды по названию

Популярные бренды