MSI MSI-3460, Руководство оператора

Страница: 37 / 60

TARE
TARE
TARE
USER
F
10) Press the USER key to
scroll the number and the
TARE key to enter each
digit of the C-Cal value.
In this example, we’ll enter the C-
Cal value of 2503. However, it
should be noted that most C-CAL
values are 5 digits.
Do not push the TARE key two
times in a row until the entire
number is entered. C-Cal’s less
than 4 digits will not be accepted.
If the number is too small the
display will read “LittL” and go
back to the “C-CAL” message.
Error Correction during number
entry: If you input a wrong value,
press
ZERO to step back one
digit and reenter.
For the rare C-CAL number that
includes a decimal point and the
X1000 annunciator, press the
POWER key to enter the decimal
point followed by an additional
press of the POWER key to input
the X1000 factor.
11) Once the entire number
is entered (not blinking)
press the
TARE key to
complete the entry of the
C-Cal value.
12) If the Calibration was
successful, the display
will read
PASS followed
by CAL’D .
13) C-Cal is complete. Press
ZERO . The next cal
setup menu item
appears.
14) Press ZERO to store the
calibration and return to
scale operation.
USER
F
USER
F
TARE USER
F
USER
F
5 times
USER
F
TARE
fixed
blinking blinking
blinking
blinking
blinking
blinking
USER
F
USER
F
blinking
3$66
TARE
ZERO
Store and return to
weight display
6WRUH
fixed
blinking
blinking
fixed
fixed
fixed
USER
F
blinking
6HWYS
&$/·'
ZERO
next Menu item
Calibration 33
Figure 5-7. C-Cal Calibration Procedure, Continued.