2-7
Hardware Setup
MSI Reminds You...
Mainboard photos shown in this section are for demonstration
of the cooler installation for Socket 604 CPUs only. The ap-
pearance of your mainboard may differ depending on the model
you purchase.
Installing the Retention Module
1. Locate the four retention mod-
ule holes around the Socket 604
on the mainboard.
2. Align the retention module with
two holes on one side of the
Socket 604.
3. Use a flat-headed screw driver
to press the white push pins into
place.
4. Repeat the same procedures on
the other side of the Socket 604.