MSH equipment WIZARD UP 30, Руководство по эксплуатации

Страница: 25 / 42

Wizard Up30 Rev. 4 28/04/2017
24
8. MAINTENANCE
WARNING! Only skilled and previously authorized personnel should be allowed to service the lift. When servicing
the lift, all safety precautions must be followed to avoid accidental starting of the machine. The master switch must be
padlocked in “
0 ” position. The key should be kept by the maintenance technician throughout the service. During
service operations, all safety instructions reported in chapter, “ SAFETY ”, must always be followed.
P.N. Whenever a maintenance is made, all actions and settings must be reported on the proper modules and
sent by fax at the 39 085 9462461. If this procedure is not fulfilled the warranty will be invalidated.
PERIODIC MAINTENANCE:
Maintenance operations must be performed at each specified maintenance period in order to keep the car lift in
perfect working condition.
The manufacturer is not liable for possible damage resulting from failure to follow
the above instructions.
•
Car lift must be cleaned once a month, at least, without using chemical agents and high pressure washing guns.
•
It is important to dauly verify that the chrome pistons shaft is clean and free from impurities that may damage it.
ATTENTION! Brake oil accidentally poured may damage lift paint. Carefully check that cylinders rods are not
damaged since inside gaskets and seals could be seriously damaged and leakage of oil could occur.
•
Check every 2 months safety devices for proper working condition, specially the operators OMA1 – Electrovalve
EV1, OMB1 – Electrovalve EV2.
•
Grease skates slide ways periodically.
•
Check every 3 months flexible tubes for proper conditions.
•
Change oil in the hydraulic system at least 3 year and anyway check if the oil has suffered alterations, check the
level and if needed add some oil type OSO32/46; check that there aren’t leaks where tubes are jointed and on the
piston, check the efficiency of the seals and replace them if needed.
•
Check that during operations there aren’t abnormal noises. If happens check the origin anf that they cannot
damage persons and the car lift.
Used oil drained from the system during oil change operations should be treated as a highly pollutant product.
Always dispose of used oil as specified by the law in force in the country where the car lift is installed.
ATTENTION! Don’t carry out any maintenance work on the hydraulic system under pressure! Before carrying
controls, repairs and or maintenance, turn off the power and safety lock the main power switch in order to avoid any
accidental ignitions of the car lift.
MACHINE DISPOSAL
When the machine must be disposal, all safety precautions specified in chapters “3” and ”4” must be followed. Only
authorized technicians should be allowed to perform this operation. Metallic parts can be scrapped as “scrap iron”. In
any case, demolished material must be eliminated according to the effective laws of the country where the car lift is
installed. It must be remembered that, for fiscal purposes, any demolition operation must be properly documented as
specified by the effective laws of the country where the lift is installed at the time of demolition.